With the tether-free Oculus Quest 2, you can fully immerse yourself in a virtual environment. However, there are still some restrictions to that.
You will still need to use controllers as a tracking tool and for input in various games and experiences. You can’t just wave your arms around and have the headset pick up all of your movements.
Even though the Quest 2 controllers are reliable and possibly the best available for VR inputs, they are nevertheless technically complex and occasionally malfunction. We can assist if you are having problems with the Quest 2 controller.
We’ll go through some Quest 2 controller issues in the hopes that you can cure them completely so you may return to the virtual reality worlds.
1. How to fix Oculus Quest 2 controller not working
You can try a few possible fixes to make your Quest 2 controllers functional once more. We’ll provide you with all the instructions for the top 5 in the section below because they’ve been the most prosperous.
Step 1. Remove and Reinsert Controller Batteries
A hard reset of your Quest 2 controllers could be a good fix for any problem you’re having with them. The AA batteries inside must be taken out and reinserted in order to accomplish this.
Push down from the top of the controller where you are holding it to remove the batteries (the white housing on the bottom).
You ought to be able to remove the batteries and then replace them by popping out the battery box.
Step 2. Disassemble and Fix the Controller
Since the Quest 2 controllers are wireless, issues with connectivity between them and the headset may arise. Simply disassembling and repairing them in an effort to bring them back in working order as soon as possible is one technique to deal with this issue.
The accompanying Oculus software is the ideal way to accomplish this, so make sure to download it on your smartphone and connect your Quest 2 to it.
After completing this, simply press Quest 2 on your smartphone device, select Controllers, and then select Unpair.
For each of the two controllers, you must perform this independently. Repeat the procedure after unpairing, but press Pair this time.
Step 3. Restart Quest 2 Headset
The age-old “switch it on and off” tactic is a tried-and-true way to get any technology to operate.
Holding down the power button until there are no more indications that the Oculus Quest 2 headset is in use will completely turn it off.
After that, turn it back on while pressing a couple of buttons on each Quest 2 controller to enable a new successful pairing.
Step 4. Factory Reset Quest 2
A factory reset of your headset is the last ditch effort you can make to resolve the Oculus Quest 2 controller issue.
There are a few different ways to accomplish this; you can read our whole factory reset instructions here.
If you have attempted all of the aforementioned solutions to the problem of your Quest 2 controller not working, it may, regrettably, be a lost cause.
For More Information Visit Our Site: https://www.techllog.com/