Can you recall an instance where you took your iPhone swimming when you didn’t mean to? Even if that’s the case, the world won’t end. All iPhones have had some degree of water resistance since the debut of the iPhone 7.
iPhones are designed to withstand submersion in water up to one metre deep for up to 30 minutes; the newest versions can even withstand immersion in water up to six metres deep for the same amount of time. As long as you get your iPhone out of the water within 30 minutes, it shouldn’t be permanently damaged.
However, if your iPhone does get wet, you must take steps to remove the water immediately to prevent any damage. We’ll walk you through how to get water out of an iPhone below.
How to Get Water Out of an iPhone Charging Port
One of the most likely places for water to enter your iPhone is through the charging port. It is the largest hole in your iPhone, after all.
Having water anyplace that you insert a charging cord is obviously far from ideal. Charging your iPhone when the lightning port is moist might cause the pins on the lightning port to corrode or short out, causing irreparable harm. The charging cord may potentially be harmed.
An alert will appear on your iPhone to discourage charging until the charging port is completely dry. The option to keep charging in the event of an emergency is available.
Water may only be released from the charging port through gravity or time. Tap your phone fairly hard while holding it with the charging port pointing down. This ought to assist in draining some of the port’s water. The only thing you can do then is to let it out to dry.
Put your iPhone in a cool, dry spot with good air circulation. Don’t try to fix your iPhone by putting it in a bowl of rice, as tiny grains of rice could potentially enter and damage the device.
Once you’ve waited an hour or so, try reconnecting the charging cord. If the warning notice persists, try again and keep trying until you no longer see it. Your phone may not be completely dry for up to a day.
How to Get Water Out of an iPhone Using Fix My Speakers
One additional major entry point for water entering your iPhone is through the speakers. There is a chance that your iPhone’s speakers will get muted or crackly if you get it wet. A sure symptom of a damp speaker is this.
The Apple Watch features a unique way of expelling any water that gets into the speakers, making it suitable for use in the shower. Sound is used to vibrate the speakers and release the water. The iPhone, unfortunately, lacks this function, but the good news is that a workaround is available.
One option is to visit a website designed specifically for that purpose, called Fix My Speakers.
Follow these steps:
Use your iPhone’s web browser to go to the Fix My Speakers site.
Maximize the volume on your iPhone by pressing the button on the side of the device.
Position your iPhone so that the lightning port is facing down, or lay it flat.
Input the wind and water emojis and tap the corresponding button.
Keep patiently waiting for the sound effects to conclude.
Get the most out of your speakers by giving them another go. If you believe that water may still be present in your speakers, you may repeat the procedures outlined above.
Also Read: How to Check Your iPhone Battery Health and Find out The Right Time for A Replacement
How to Get Water Out of an iPhone Using an App
There’s also an app for that; it’s called Sonic App, and it allows you to shoot water out of your iPhone’s speaker. Similar to the Fix My Speakers app, this one uses the speaker’s own internal pressure to expel the water.
To do this:
Download Sonic for iPhone, it’s free, and open it up.
If you want to charge your iPhone, lay it flat or tilt it ever-so-slightly so that the lightning connector is at the base.
To get started, tap the water drop icon on the screen.
Allow the software to run for around 10 seconds before selecting STOP.
Repeat the speaker test.
The technique can be repeated as many times as necessary to completely dry your speakers. When you’re done, just remove the programme from your iPhone until the next time it gets wet.
Also Read: Step-by-Step Guide to Share Wifi QR Code on iPhone
Setting Up a Water Ejection Shortcut on iPhone
Have you been repeatedly submerging your iPhone’s speaker? In order to speedily eject the water, you can programme your iPhone to launch a custom shortcut.
Specifically, it goes like this:
Access the Water Eject iPhone shortcut page by opening it in Safari and tapping the Get Shortcut button.
Choose Add Shortcut on the menu.
Select the My Shortcuts button next.
Select the “Water Eject” button to access its shortcut menu.
Click the start button for the water to start shooting out. If you launch the shortcut without first increasing the volume, the shortcut will use the current volume settings.
Keep waiting until you hear a ping, that’s when the shortcut will be complete.
There’s a chance you’ll see a warning that the shortcut can’t see a particular Wikipedia article.
This alert is unnecessary, as the shortcut has already been executed. If any water remains in the speaker, start the process over.
Taking Care of Your iPhone
There are several ways to take care of your iPhone, and one of them is to know how to remove water from it. The iPhone can be maintained in excellent condition in a variety of additional ways.
If you want better performance and longer battery life, you can learn to activate optimal battery charging. If you’re concerned about the privacy of your personal information and the number of intrusive advertisements you’re subjected to on your iPhone, learning how to disable ad tracking is a great move.
Learning how to restore Safari’s search bar to its traditional position at the top of the browser will provide noticeable advantages to your day-to-day experience.
For More Information Visit Our Site: https://www.techllog.com/
