Your iPhone can alert you if there is moisture in the Lightning port when you attach a Lightning cable or accessory to an iPhone XS, iPhone XS Max, iPhone XR, or a later model.
Your iPhone has detected liquid in the Lightning port, on the Lightning cable, or on a Lightning accessory if you get one of these notifications. Charging and accessory connection are not possible until the Lightning port and the accessory are dry in order to protect your iPhone and the accessory.
‘Liquid Detected in Lightning Connector’ – What Does It Mean? “Mean?
a liquid was discovered in a lightning connector “If your phone detects liquid in the Lightning port, the port at the bottom of your device where you plug in your charger, a message will show up on your screen. It will also show up if your phone detects liquid in a connected device, such as a speaker or a set of headphones.
How to Remove Water from The Lightning Port on Your IPhone
Depending on the model, your iPhone may even be waterproof or water-resistant, so it is built to survive harm (to understand the difference, check out our guide). In either case, that’s good news for you—and your phone—if you drop it in the pool or unintentionally splash a drink on it.
You must dry out your phone if it does get wet and water gets into the iPhone charging port in order to prevent harm. Giving it time to dry is the only effective way to achieve this. To properly dry your phone, follow these steps:
- Make sure all wires, including the wired charger, are unplugged from your phone.
- If any liquid is inside your phone, gently touch it while the Lightning connector is pointed downward to see if you can get it to drain.
- Give the phone at least 30 minutes in a dry place with good airflow. If the “liquid detected in Lightning connector” message displays, connect it to a Lightning cable or another accessory “message is still present.
- If you continue to see that warning, the liquid is still present in the Lightning port or between the connector’s pins on your Lightning cable.
- Follow the same procedure as before, but give your iPhone more time to dry before testing it with a charger or device. If the issue persists, give your phone 24 hours to dry before trying it again.
We’re close by if you’ve tried these suggestions but still need a little assistance. Schedule a repair at your nearby Asurion Tech Repair & SolutionsTM or uBreakiFix® by Asurion location, and our qualified technicians can have your device working again as soon as the same day.
Read More: Best Ways to Fix Blue Screen of Death Windows 10
Do You Need to Activate Emergency Override Mode?
Your gadgets and accessories may become permanently damaged if you use your charger while the iPhone is still wet. However, you can disable the liquid detected in the lightning connector message and charge your phone in an emergency.
You can accomplish this by taking out and then reinserting the charging cord. the identical “liquid detection” “There will be a notification, however, you can now tap Emergency Override and charge your phone.
To prevent further harm to the lightning port on your phone, we advise using a wireless charger rather than pinning it to a wall outlet. Before attempting to charge your gadget wirelessly, just make sure the back is dry.
Safeguard Your Phone
Asurion has aided 300 million clients in protecting, connecting, and utilizing their favorite technology for more than 25 years. The same is true for smartphones. Make sure your gadget is secure because your life depends on it. Today find out more about Asurion’s phone insurance options.
How to Fix the “Liquid Detected in Lightning Connector” Error on An IPhone
The software of the iPhone has a system that checks for moisture in the port’s lightning connector. Given that the charging and headphone connections share the same connector, this feature is advantageous.
Any method is designed to alert the user in an emergency because the phone’s internal components are susceptible to fluids. The issue, though, is that it continues to display the same message even when the phone is as dry as desert sand.
Newer versions like the iPhone X, iPhone SE3, iPhone 13, and iPhone 14 are also affected. The notification appears out of nowhere and interferes with the device’s smooth navigation. After thousands of reports of the problem, no specific case could be identified as the reason. People then started looking for solutions or methods to get around the message.
Read More: Install Npm: Step by Step Guide to Install Npm
What Should I Do If My iPhone Alerts Me That Water Is Present?
Now that you are aware of the mistakes to avoid, let’s explore the correct ways to remove water from your charging port.
Step 1: Take Off the Case and Turn Off Your IPhone
Turn off your iPhone right away and take off the case as soon as you pull it out of the water. The case may be submerged in water, which could seep into the weak areas. Moreover, turn off your iPhone. When wet, using it increases the risk of damage.
Step 2: Disconnect Every Accessory
Remove all of the accessories, such as the hands-free, lightning cord, after turning off your phone. You should also remove your SIM card. Reinstall the SIM card and any other accessory only when they have dried completely. Be sure to turn off the power to your iPhone. The circuit board or charging port should never have water on it, as this might be hazardous when connecting to any electric source.
Step 3: Dry your iPhone
Use a cloth or piece of tissue paper to soak your iPhone after unplugging all of its accessories. This stops any additional water from penetrating the layers of the screen, the buttons, or the circuit board. However, avoid putting a cloth inside the port because it could be dangerous.
Step 4: Lightly tap your palm.
Droplets of water will come out of the lightning connector if you gently tap your iPhone on your palm with the port facing downward. Water is pushed out of the port and downward as a result. This approach is regarded to be the most effective and safe, according to Apple Support Service.
Step 5:Try a Different Lightning Connector
Look for your lightning cord if your iPhone still displays the liquid detection error despite the fact that the lightning port is dry. An issue with the hardware might exist. Water exposure might also harm the cable. You receive the “Charging Not Available” message on your iPhone when water gets between the charging cable pins.
To determine the true reason for the issue, try an alternative charging cord. If your iPhone charges using a different cord, the cable was tampered with. For a better user experience, it is advised to use Apple’s original accessories.
Step 6: Keep for 24 Hours in A Well-Ventilated Environment.
If trying a new cable didn’t solve the issue, the lightning port is undoubtedly at fault. Even after you have dried the port, your iPhone will continue to put up an alert if it detects wetness inside. Due to its high sensitivity, the iPhone won’t allow charging for a few hours. It’s best to leave your iPhone in a well-ventilated area for the entire day. You can check periodically to see whether you’ve had any luck.
Step 7: Restart your iPhone
Restart your iPhone after a 24-hour wait. Restart your phone if the error continues. Your phone will restart after a reboot and minor issues will be fixed. To reboot your computer, adhere to the steps below.
- Hold the volume up/down and power buttons at the same time.
- On the screen, a slider will appear; slide it to the Power Off position.
- To turn your iPhone off, slide the power slider. Shut down your iPhone.
- 30 seconds should pass.
- Hold down the power button while waiting for the Apple logo to show on the screen.
