There may be something blocking the port if your iPhone isn’t charging.
Use toothpicks or pressured air to clean it out, but always exercise extreme caution.
Avoid putting anything metallic or getting the iPhone’s charging port wet.
Your iPhone might not be charging properly for a number of reasons; you may need to reset your device, look for kinks and breaks in the Lightning cord, and confirm that your power supply is operational.
If you’ve done all of that and it’s still not working, there may be enough debris in your port to prevent the connector from forming a secure connection.
Yes, the port on your iPhone may become so filthy that it stops operating. Anytime you put it in a pocket or purse, little lint, dust, and other particles can get inside.
Furthermore, when you insert the cable, the dirt is compressed and packed deeply into the port. It might eventually get so clogged with debris that it stops functioning.
How to Clean Your iPhone’s Charging Port
You should invest in a flashlight or operate beneath a bright LED desk lamp since you need to be able to see clearly within the charging port. The brighter the lamp, the better.
With some compressed air and a toothpick, you can carefully clean the charging port on your iPhone.
While compressed air might be a good place to start, only a toothpick is appropriate for inserting into the port to remove dirt that has become lodged inside.
Never attempt to clean the charging port with something that is harder than wood, such as a metal rod or pin. The port contains sensitive electronics that can be irreparably harmed by being rammed with a sharp metal pin.
- Completely turn off your iPhone. You can launch the Settings application, select General, and then select Shut Down.
- Shoot a few short, controlled bursts into the port while holding the compressed air can upright (so it just shoots air and doesn’t eject wet propellant).
- Switch on your phone and attempt charging it once more. Try the toothpick next if it’s still not working.
Also Read: How to Clean AirPods, AirPods Pro, AirPods Max, and EarPods Safely and Easily!
A toothpick is the ideal size, shape, and hardness for cleaning the port on your phone; avoid using anything made of metal for the task.
4. Once more, insert the toothpick carefully into the port while your phone is off, then lightly scrape the toothpick against the port’s interior wall.
There are delicate pins on the interior wall of the phone that is closest to the front; avoid applying pressure to it.
Overall, it’s crucial to be delicate since, in addition to those pins, the sides also have two tiny spring-mounted anchors that, upon the cable’s insertion, latch onto the charging port, which is how the charging port “snaps” into place. Anything you break will no longer be able to be charged.
When you swipe the port with the toothpick, take care not to harm the mechanical springs or electronics that are within.
5. Give the port another blast of compressed air after using the toothpick for a moment to help remove anything you’ve managed to dislodge.
6. If you clean out some dirt, try turning the phone back on and charging it.
Congratulations—you’re back in business if it succeeds. You can try again — carefully — or bring it to an Apple service center for assistance if it still doesn’t work.
Also Read: Top 15 Cleaner App that Clean out Junk from Your Device!
How to Get Water out Of Your iPhone’s Charging Port
Unplug all of your iPhone’s accessories and tap the device on your hand with the charging port looking down if you receive a notification that there is water in the port.
Leave the phone in a dry place with sufficient ventilation to properly dry the port.
A quick tip: According to Apple, the port may not dry entirely for up to 24 hours. Do not use an external heat source, such as a hairdryer, no matter how alluring it may be.
For More Information Visit Our Site: https://www.techllog.com/
